Fast analysis of triterpenoids in Ganoderma lucidum spores by ultra‐performance liquid chromatography coupled with triple quadrupole mass spectrometry

A rapid and reliable method was established for simultaneous determination of main triterpenoids in Ganoderma lucidum spores using ultra‐high‐performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC‐TQ‐MS). The established method was validated in terms of linearity, sensitivity, precision, accuracy and stability, and was successfully applied to determine the contents of 10 main triterpenoids in different batches of G. lucidum spores. The analysis results showed that moderate levels of triterpenoids were found in G. lucidum spores. In addition, a MS full scan with a daughter ion scan experiment was performed to identify the potential derivatives of triterpenoids present in G. lucidum spores. As a result, a total of 22 triterpenoids from different G. lucidum spores were unequivocally or tentatively identified via comparisons with authentic standards and literatures. This method provides both qualitative and quantitative results without the need for repetitive UPLC‐MS analyses, thereby increasing efficiency and productivity, making it suitable for high‐throughput applications. Copyright © 2013 John Wiley & Sons, Ltd.     

A μ3-OH- bridged two-dimensional zinc(Ⅱ) coordination polymer based on an anthryl ligand：Synthesis, characterization and luminescent properties

A two-dimensional (2D) 3,3,3,4,5,5,6-connected ZnⅡ coordination compound [Zn5(L)2(OH)6]∞ (L=9,10-dioxo-9,10-dihydroanthracene-1,8-dicarboxylate) has been synthesized and characterized by IR, elemental analysis, X-ray powder diffraction and single crystal X-ray diffraction analysis. Moreover, the luminescent properties of the ligand and corresponding compound have been briefly investigated.     

Computational studies on 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.12,8.04,13.06,11]hexadecane as potential high-energy-density compound

The B3LYP/6-31G(d) method of density functional theory was used to study molecular geometry, electronic structure, infrared spectrum, and thermodynamic properties. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. Thermal stability of 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.1^2,8.0^4,13.0^6,11]hexadecane (cage-HMX) was investigated by calculating the bond dissociation energy at unrestricted B3LYP/6-31G(d) level. The calculated results show that the first step of pyrolysis is the rupture of the N–NO₂ bond. The crystal structure obtained by molecular mechanics belongs to P2₁ space group, with lattice parameters a = 8.866 Å, b = 11.527 Å, c = 13.011 Å, Z = 4, and ρ = 2.219 g cm^?3. Both the detonation velocity of 9.79 km s^?1 and the detonation pressure of 45.45 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability as a high-energy-density compound, cage-HMX essentially satisfies this requirement. These results provide basic information for molecular design of novel HEDCs.     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Assembly of peptide–thiophene conjugates: the influence of peptide content and location

Biomolecule-directed self-assembly of π-conjugated oligomers has attracted great attention in the past decade. In this contribution, two conjugates composed of quaterthiophene and tetrapeptide (Gly-Val-Gly-Val) were synthesised, namely peptide–thiophene–peptide (PTP) and thiophene–peptide–thiophene (TPT), to investigate the influence of peptide content ratio and its location in the molecular structures on the nanostructures and properties of the assemblies. Both conjugates formed organogels consisting of left-handed twisted nanostructures; however, anti-parallel β-sheets were observed in PTP while parallel β-sheets were obtained for TPT, although in both cases oligothiophenes adopted an H-like stacking mode. Obvious solvent-induced supramolecular chirality inversion from the oligothiophene segment was observed for PTP while such phenomenon was not clear for TPT. PTP and TPT gels also showed different stabilities towards temperature increase, as evidenced by variable-temperature circular dichroism study. From the data, it is suggested that the rational design of the location and ratio of peptide plays a key role in constructing materials with determined properties based on peptide–thiophene conjugates.     

1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane: a new application for catalyzing the direct substitution of 9H‐xanthen‐9‐ol at room temperature

1,3‐Dichloro‐tetra‐n‐butyl‐distannoxane was firstly used to catalyze the direct substitution of 9H‐xanthen‐9‐ol with indoles at room temperature to afford a class of 3‐(9H‐xanthen‐9‐yl)‐1H‐indole derivatives in good to excellent isolating yield. Moreover, other nucleophiles (such as diketone and pyrrole) could also proceed smoothly in this methodology. Copyright © 2012 John Wiley & Sons, Ltd.     

Interpolation inequalities with weights

We use elementary methods to prove a sufficient and necessary condition for a Sobolev interpolation inequalities with weight [ILLM0001] where [ILLM0001] are real numbers, and [ILLM0001]     

N-substituted-3(10H)-acridones as visible-light photosensitizers for organic photoredox catalysis

N-Substituted-3(10H)-acridones have been established as visible-light organic photocatalyst. These photosensitizers are efficient for oxidative coupling reaction of N-aryl tetrahydroisoquinolines with various nucleophiles. Notably, N-methyl-3(10H)-acridone (Ia) is stable and can be effectively prepared. It is a water-soluble and atom-economic catalyst, and thus holds promise for green chemical applications. Mechanistic studies confirm a single electron transfer (SET)-induced radical process and a rate-limiting step. Analysis of the photocatalytic reactivity?structure relationship reveals that the acridones are robust and tunable photosensitizers for photoredox catalysis.     

A relaxation times coupling method to construct acoustic relaxation calibration for two-frequency measuring gas compositions

In our previous work (Hu et al., 2014), a method has been proposed to detect gas compositions by locating the acoustic spectral peaks, which can be detected only by two-frequency acoustic measurements in practice. However, as a ‘Detection Calibration’, the effective relaxation area (ERA) constructed by existing theoretical model cannot match the two-frequency measurements when there are more than one strong relaxational components in gas mixtures. This paper proposes a method to construct the ERA by coupling the decoupled single relaxation times together to a whole relaxation time. For gas mixtures with only one single relaxation process, the predicted ERA results match with the experimental data better than those predicted by the existing model. Moreover, for gas mixtures in which more than one relaxation process are significant, the ERA results predicted by the proposed method also match with the detection results of two-frequency measurements better than the existing model. This relaxation time coupling based ERA constructing method is validated by the application in low-quality natural gas detection.